Part of a homeowner’s responsibilities is to make sure that every component in the property is in good condition. The appliances and furniture should be cared for. The yard should be well-kept. The needs of the household members should be attended to. If you are the only one who deals with every little thing in your home, then you should be close to becoming a super man or a super woman. This is tested even more when your septic system is concerned. The majority of your property’s sanitation depends on your septic system. It is only appropriate that its well-being is looked after all the time. One question that many homeowners ask their septic professional is, how deep below the surface is my septic lid?
The septic system is a very indispensable part of your house. When you cannot have access to the town’s sewer system, then you have no choice but to have your personal wastewater treatment system. The septic system is composed of the septic tank and the drain field. In the septic tank, the initial treatment takes place through the help of the anaerobic bacteria. The resulting clear effluent that is still laced with pathogens and contaminants enters the drain field. Here, the aerobic bacteria and the bio-mat aid in filtering out the harmful contaminants and disease-causing microorganisms before it is dispersed into the surrounding environment.
It is truly very hard work for the septic system to accommodate all the wastewater that your household produces that is why you have to take good care of it and ensure its smooth run. You can do this by inspecting your septic system regularly. This may not be a very glamorous task to undergo but you have to do it to have a clear picture of how your septic system’s status is. But in order to do this, you have to access your septic lid. The septic lid actually depends on where your septic system is installed, how big it is, and how deep it is installed under the surface. Usually the septic lid is composed of 3 separate caps. If you know where these caps are, then you will be good at maintaining your septic system.
How deep blow the surface is my septic lid? There are steps to know how deep your septic lid really is:
1. You have to find where the pipes leave your house. These would most probably be in the basement. Just follow them.
2. Take 10 steps from your house because a typical septic tank is placed ten to twenty feet from your home.
3. Get a steel probe that is about 5 feet and push it into the ground to feel for your septic tank. Just be careful when you do this so that you may not damage or puncture it. If this happens, you would have to spend a lot to replace the septic tank.
4. The first cap is usually in the grassy area, near the tank’s edge. The common width of a tank is six feet.
5. Return to your house and walk 6 feet from it. By then, you will locate the second cap.
6. Two more steps and you will access the discharge cap.
The usual depth of the septic lid is up to 5 feet, depending on how deep the septic tank is. You could ask the help of your septic expert to locate the septic lid much faster. If the septic expert was the one who installed your septic system, then it would be much more convenient because he would already know where they are like the back of his hand.
It could be really taxing for a homeowner to look for the septic lid. If proper instructions aren’t given and proper procedures aren’t done, the septic system would most probably end up damaged. Hitting the pipes with the steel probe that you have is a likely consequence to lack of information. You really have to see to it that you get as much data about your property’s septic system as soon as you acquire it. One important question to remember is to ask your septic tank professional how deep below the surface is my septic lid.